Frymaster GBC EN Manual do Utilizador

Frymaster, a member of the Commercial Food Equipment Service Association, recommends using CFESA Certified Technicians. 819-5312 24-Hour Service H

1-7 5. Remove the four bolts securing the motor mount to the frame, then remove the motor and mount assembly from the unit. NOTE: It is possible to

1-8 3. Reconnect the cooker to the gas supply and check all connections for leaks using a solution of soapy water. DANGER DO NOT use matches, can

1-9 10. Invert the cookpot or rinse tank on a suitable work surface and remove the salvageable components (e.g., probe block assembly, blower assembl

1-10 1.4.3 How the Autofill/Autoskim System Works The heart of the automatic filling (Autofill) system is a normally closed solenoid valve that open

1-11 extinguishing the burners. This process repeats as required to maintain the temperature at the setpoint programmed into the controller. The con

1-12 PROBLEM PROBABLE CAUSES CORRECTIVE ACTION Continued from previous page. C. Failed solenoid, failed computer, or broken/loose wiring. Test 1:

1-13 PROBLEM PROBABLE CAUSES CORRECTIVE ACTION A. Failed 24VAC (blower) relay. Test: Check for 24VAC on Pin 4 of 15-pin connector. A. If volta

1-14 PROBLEM PROBABLE CAUSES CORRECTIVE ACTION A. Controller out of calibration. A. Recalibrate simmer setpoint. Water boils in simmer mode. B.

1-15 1.4.6 Probe Resistance Chart and Wiring Diagrams RESISTANCE CHART FOR USE WITH 806-4764 PROBE F OHMS C F OHMS C F OHMS C F OHMS C 32 486.0 0.

1-16 WIRING DIAGRAMS 6C23C29C27C71C70C59C2C7C24V55C43C22C56784321SWITCHCENTRIFUGALCOMPUTERLIGHTTROUBLETEMP.SOUND DEVICE24 VACNCNCNCNCSENSORWATERNORMAL

DANGER IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE, OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY, OR DEATH. READ THE INSTALLATION,

1-17 FOR UNITS WITH TWOSINGLE-SPARK IGNITION MODULES6C23C29C27C71C70C59C2C7C24V54C55C43C22C56784321SWITCHCENTRIFUGALCOMPUTERLIGHTTROUBLETEMP.SOUND DEV

GAS COOKERS GSMS, GBC, AND GC SERVICE AND PARTS CHAPTER 2: PARTS LIST 2-1 2.1 Accessories 53482761 ITEM PART # COMPONENT 1 803-0018 Cup, Sing

2-2 2.2 Basket Lift Components 11DETAIL A2316 20 39312916435 2136273313413828374426281442401518191830103192522177431612532249SEE DETAIL A34

2-3 ITEM PART # COMPONENT 1 Motor, Basket Lift 807-0107 120 VAC 807-0108 240 VAC 2 807-0124 Bushing, Plastic 3 807-0240 Microswitch, BA-2RV22

2-4 2.3 Cabinetry 2.3.1 GBC/GC 17181991415 162120222319242526272810987123456111213See Page 2-6 for casters.AB

2-5 ITEM PART # COMPONENT 1 806-3853SP Door Assembly, 18.66-inch x 19.85-inch (does not include handle) 806-4487SP Door Pin Assembly 826-1343

2-6 2.3.2 GSMS and GSMS/GBC Batteries NOTE: GSMS-GBC Battery cabinetry consistsof one GSMS cabinet and one GBC cabinetbattered together using Frye

2-7 ITEM PART # COMPONENT1 Topcap 824-0433 GSMS 824-0473 GSMS/GBC Battery (for rinse tank on left use 824-0921)2 809-0266 Screw, #10 x ½-inc

2-8 2.4 Combustion System Components 1Cookpot shown for reference only.See Page 2-13 for cookpot components.2345678910111213141516

2-9 ITEM PART # COMPONENT 1 816-0165 Insulation, GSMS/GBC/GC Ignitor 2 Ignitor 810-0521 Natural Gas 810-0608 Propane Gas 810-0923 Manufact

i GAS COOKERS GSMS, GBC AND GC SERVICE & PARTS MANUAL TABLE OF CONTENTS CHAPTER 1: Service Procedures 1.1 Functional Description...

2-10 2.5 Control Box and Related Components 14 5 108 262623105426627712119 10171413151217161819920212223242528See NOTENOTE: Item 23 is for use with

2-11 ITEM PART # COMPONENT 1 900-7532 Box, Control 2 807-1396 Relay, 24VDC SPDT (Basket Lift Relay – GSMS and GBC units only) 3 810-0045 Bushing

2-12 2.6 Controllers and Control Panel Components 1274567433 ITEM PART # COMPONENT 1 Control Panel and Controller Assembly, GSMS (does not incl

2-13 2.7 Cookpot, Rinse Tank, and Associated Components 2.7.1 Cookpot and Rinse Tank Components (Other than Cookpot Insulation) 5632178129121011 1

2-14 2.7.2 Cookpot Insulation 451291011123876NOTE: Cookpot shown for reference only.Refer to Page 2-13 for cookpot components.Refer to Page 2-8 for

2-15 2.8 Drain Components 47732691854NOTE: Items 1, 4, 8, and 9are also used on the rinse tank.Plumbing from the rinse tankdrain valve to the floor

2-16 2.9 Gas Supply System Components 3114 417171091213651427816118561961211511578232417171392120221123Non-CE Assembly CE Assembly

2-17 ITEM PART # COMPONENT 1 826-1374 Screw, #10 x ½-inch Hex Head (Pkg. of 25) 2 810-0691 Tube, Vent 3 Valve, Honeywell Gas (Non-CE) 826-1122

2-18 2.10 Water Supply System Components Item 6 (nipple) is threaded into item 1 (solenoid).Item 3 (nut) is threaded onto item 6 to secureitem 14 (m

2-19 ITEM PART # COMPONENT 1 806-5565 Valve Assembly, Solenoid 2 826-1374 Screw, #10 x ½-inch Hex Head (Pkg. of 25) 3 809-0454 Nut, ½-inch Con

1-1 GAS COOKERS GSMS, GBC, AND GC SERVICE AND PARTS CHAPTER 1: SERVICE PROCEDURES 1.1 Functional Description The GSMS, GBC, and GC Gas Cookers all h

A-1 APPENDIX A NOTES AND PARTS UNIQUE TO GSW/GWB VARIANTS A relatively small number of GSW/GWB variants have been manufactured. These two variants a

A-2 41523577891011121314161817811CONTROL COMPONENTS Item Part # Component 1 806-8667 GSW/GWB Control Box 2 806-9592 Interface Board (Water Board)

A-3 SERVICE COOKPOTNote presence offitting for thermostat.Note presence ofholes for mountingbutton-type waterlevel sensors. Order P/N 823-0491SP for

A-4 ABCDDETAIL "D"DETAIL "C"DETAIL "B"DETAIL "A"WATER SUPPLY COMPONENTSFAUCET PLUMBINGSINGLE COOKPOT PLUMBINGD

A-5 Item Part # Component 1 806-7551 Valve Assembly, GSMS Solenoid 2 809-0454 Nut, ½-inch Conduit 3 810-0907 Elbow, ⅜-inch NPT Compression 4 810-10

A-6 WIRING DIAGRAM(FOR UNITS MANUFACTURED OCTOBER 2000 AND LATER)

A-7 WIRING DIAGRAM(FOR UNITS MANUFACTURED PRIOR TO OCTOBER 2000)

THIS PAGE INTENTIONALLY LEFT BLANK

Shipping Address: 8700 Line Avenue, Shreveport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-318-219-7140 (Tech Support) 1-318-219-7135 Pric

1-2 water supply line for three seconds every minute until the option is turned OFF by again pressing the Skim switch. The operator enters a specifie

1-3 1. Disconnect the unit from the electrical power supply, the gas supply and the water supply. 2. Disconnect any attached restraining devices.

1-4 5. Replace the component box cover, and reinstall the controller being sure to reconnect the ground wire and trouble light wires. Reconnect the

1-5 1.3.4 Replacing the Pressure Regulator or Solenoid Valve 1. Drain the cookpot and disconnect the cooker from the electrical power supply. Turn

1-6 Remove the six screws inthe faucet mounting plate.Disconnect water line atthis compression fitting.Remove this nut to separate thefaucet from the